|
|
 |
 |
|
 |
|
||
Sorry that it's late... I'll make an on time post next time!
As we went into the machine shop today... we saw a huge pizza size sprocket on the CNC. This sprocket took the mentors 6 hours to make!! This sprocket is used for the turret. Then we had to make a hole in the middle of the big sprocket for the balls to pass through. In order for us to make the hole, we needed the dial looking edge finder to find the center so that we know where the center is. Except it took us a while to find the dial looking edge finder. We looked all over the machine shop and we couldn't find it. In the end, we found the dial looking edge finder back where it was suppose to belong. Then we used the CNC and cut the hole in the center for the balls to pass through. Then we cleaned up the mess we made on the CNC. Later on, we decided to create a calender our posting dates, so that everyone can know what date they're suppose to post. After that, we were discussing on what to do, thinking and creating of ideas.
Pictures :)
 Mr. Ing playing with Sam's puzzle cube :)
 Look at the BIG pizza sprocket that took the mentors 6 hours!!
 We have to cut a hole so that the ball can go through [Lixi's perfect circle of where the CNC will cut]
 After the hole was cut, Wendy is cleaning up the mess
 All cleaned up! See the perfect circle?
 We made a calendar with secret codes :) but... Mr. Tui guessed it...
 Mr. Tui is showing Mr. Ing his idea that he came up with :)
|
|||
Disclaimer: These are actual student posts done by students and not paid actors. We make no claims or guarantees that the information contained herewith is 100% accurate or free of grammatical/spelling errors (English is not the first language for many of our members). You have been warned. |